6. The “Main Stream” will be used by all channels for connection.
Right-click on the concerned video channel to open the following menu.
g the following parameters for each channel:
Main Stream → main video stream (best quality and highest bandwidth)
for settin
→ secondary video stream (lower quality and less bandwidth)
]
eIM
ub st hannels with maximum resolution
an be viewed with both DVRs by setting “Main Stream” to maximum resolution (CIF) and
Sub Stream
Open Sound → to open the sound channel [only if sound transmission is available
(1093/041 only) and “VIDEO & AUDIO” stream mode is selected in the system configuration menu
PORTANT NOTE
• For DVR DVS 1093/043 and 1093/043 models, if a “S ream” is set to all c
(CIF) it will not be possible to view all channels.
• All channels c
connecting using the main video stream.
7. Double click on the video signal to stop the connection:
will appear again.
7.4.8.3 Playback
In addition to LIVE channels, the Internet Explorer interface has a section for displaying recordings stored on the remote
VR, or on the PC in the folder C:/mpeg4record, which may be used without needing to shut down the LIVE channels.
his interface is capable of displaying up to 4 recordings at the same time. The recordings can be managed and saved
onto the local PC.
Click on
D
T
to access the Playback interface.
The following screen will appear.
Figure 69: playback interface
vailable video
Display mode
Control panel
Hit list area (list of
recordings).
vailable fields:
- file name
- start time
- end time
- size
Select/define search
criteria
Search button
Display grid
Selected recording
playback position
DS1093-005C 94
To Next Page
Loading...
Need help?
General
