3.1.2 Local Settings
You can set local parameters for your PCs.
Figure 3-3
[Video Param]
Processing Mode
Real Time Prior: Select this if the network is in good condition.
Fluent Prior: Select this if you want short time lag for live video.
Ultra-Low Latency: Select this if you want the minimum time lag for live video.
Video Pixel Format: Select the video format for images at your local computer. It is
recommended to choose YUV420 if the graphics card of your PC supports it.
Protocol: Select the protocol used to transmit media streams to be decoded by the PC.
To Next Page
Loading...