USAVision UVS-ABL1300 - Setting up IP Cameras on GV-VMS

6.2 Setting Up IP Cameras on GV-VMS
Follow the steps below to manually connect your camera to GV-VMS.
1. To access the IP Device Setup page, click Home
, select Toolbar , click
Configure
and select Camera Install.
Figure 6-6
2. Click Automatic Setup
3. Double-click the camera and type the user name and password of the camera.
.
Figure 6-7
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com