Compensation: Adjust the compensation value as required to achieve the desired
effects. You can set this parameter only when Exposure Mode is not set to Manual.
Metering Control: Set the way the camera measures the intensity of light. You can only
set this parameter when Exposure Mode is not set to Manual.
Center-Weighted Average Metering: Measure light mainly in the central part of
images.
Evaluative Metering: Measure light in the customized area of images.
Day/Night Mode: Select Automatic for automatic switch between day mode and night
mode depending on the amount of light detected. Select Night to produce high-quality
black and white images using the existing light. Select Day to produce high-quality color
images using the existing light.
Day/Night Sensitivity: Set the light threshold for switching between day mode and
night mode. A higher sensitivity means that the camera is more sensitive to the change
of light and becomes more easily to switch between day mode and night mode.
Day/Night Switching(s): Set the length of time before the camera switches between
day mode and night mode after the conditions for switching are met.
WDR: Enable WDR to distinguish the bright and dark areas in the same image.
WDR Level: After enabling the WDR function, you can improve the image by adjusting
the WDR level.
To Next Page
Loading...