USR IOT USR-DR404 - At+Wsssid; At+Wslk; At+Webu

USR-DR404 user manual www.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
64
4.3.4.11. AT+WSSSID
Function: Query/Set AP’s SSID in STA mode.
Format:
Query : AT+WSSSID<CR>
+ok=<ap’s ssid><CR>< LF ><CR>< LF >
Setting: AT+ WSSSID=<ap’s ssid ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 ap’s ssid: AP’s SSID
This parameter only valid in STA mode, after restarting the module, parameters take effect. But can also be set in AP
mode.
4.3.4.12. AT+WSLK
Function: Query the link status in STA mode (only available in STA mode)
Format:
Query : AT+ WSLK<CR>
+ok=<ret><CR>< LF ><CR>< LF >
Parameters:
 ret:
 If not connected: Returns “Disconnected”.
 If connected: Returns "SSID of AP (MAC of AP)"
This parameter only valid in STA mode.
4.3.4.13. AT+WEBU
Function: Query/Set web server username and password.
Format:
Query : AT+WEBU<CR>
+ok=<usr,password><CR>< LF ><CR>< LF >
Setting: AT+ WEBU=< usr,password ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 usr: username