USR IOT USR-DR404 - At+Timeoutt; At+Fapsta; At+Httpscen

USR-DR404 user manual www.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
83
Parameter takes affect after restarting the module.
4.3.4.64. AT+TIMEOUTT
Function: Query/Set timeout restart time
Format:
Query : AT+ TIMEOUTT<CR>
+ok=<time><CR>< LF ><CR>< LF >
Setting: AT+ TIMEOUTT=<time ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 time.: timeout restart time, 60-65535s, default is 3600s.
4.3.4.65. AT+FAPSTA
Function: Enable/Disabled AP+STA function
Format:
AT+FAPSTA=on/off<CR>
+ok<CR>< LF ><CR>< LF >
This command enables or disables AP+STA function, default is disabled. Parameter takes affect after restarting the
module.
4.3.4.66. AT+HTTPSCEN
Function: Query/Set HTTPD Client mode: long/short
Format:
Query : AT+HTTPSCEN <CR>
+ok=<mode><CR>< LF ><CR>< LF >
Setting: AT+HTTPSCEN =<mode><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 mode: HTTPD Client mode, including
 long: long connection mode
 short: short connection mode