USR IOT USR-DR404 - At+Htptp; At+Htpurl; At+Htphead

USR-DR404 user manual www.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
77
 port: HTTP server IP port
This parameter is only valid in HTTPD Client mode, takes affect after restarting the module. But can also be set in other
modes.
4.3.4.48. AT+HTPTP
Function: Query/Set HTTP requesting type (new).
Format:
Query : AT+ HTPTP<CR>
+ok=<Type><CR>< LF ><CR>< LF >
Setting: AT+ HTPTP=<Type><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 Type: HTTP requesting type, including
 GET
 PUT
 POST
This parameter is only valid in HTTPD Client mode, takes affect after restarting the module.But can also be set in other
modes.
4.3.4.49. AT+HTPURL
Function: Query/Set HTTP URL (new).
Format:
Query : AT+ HTPURL<CR>
+ok=<path><CR>< LF ><CR>< LF >
Setting: AT+ HTPURL=<path><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 path: HTTP requesting path.
4.3.4.50. AT+HTPHEAD
Function: Query/Set HTTP header (new).
Format:
Query : AT+ HTPHEAD<CR>