USR IOT USR-DR404 - At+Wap; At+Wakey

USR-DR404 user manual www.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
65
 password: password.
4.3.4.14. AT+WAP
Function: Query/Set parameters in AP mode
Format:
Query : AT+WAP<CR>
+ok=<wifi_mode,ssid,channel><CR>< LF ><CR>< LF >
Setting: AT+ WAP=<wifi_mode,ssid,channel><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 wifi_mode: WIFI mode, including
 11BG
 11B
 11G
 11BGN
 11N
 ssid: SSID in AP mode
 channel: WIFI channel, AUTO or CH1~CH11
This parameter only valid in AP mode, after restarting the module, parameters take effect. But can also be set in STA
mode.
AT+WAP=11BGN,SOCKAB+STA-TEST,Auto
4.3.4.15. AT+WAKEY
Function: Query/Set encryption parameters in AP mode
Format:
Query : AT+WAKEY<CR>
+ok=<auth,encry,key><CR>< LF ><CR>< LF >
Setting: AT+ WAKEY=< auth,encry,key><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 auth: Authentication mode, including
 OPEN
 SHARED