USR-DR404 user manual www.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
Diagram 49 AT command software
4.2.2. Net AT command
The above is the AT command setting through the serial port. The user can also set the AT command through WIFI.
First, the computer establishes a network connection with USR-DR404, and uses AT Setup software.
Diagram 50 Web search
Click “Search”, the searched USR-DR404 will be displayed, click the USR-DR404, and then set through the left operation
area (the method is the same as the serial port setting)
To Next Page
Loading...
