USR IOT USR-DR404 - At+Reboott; At+Timeouten

USR-DR404 user manual www.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
82
Format:
Query : AT+REBOOTEN<CR>
+ok=<sta.><CR>< LF ><CR>< LF >
Setting: AT+ REBOOTEN=<on/off><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 When querying, sta.: returns whether timing restart function is enabled, including
 on, timing restart function is enabled
 off, timing restart function is disabled
Parameter takes affect after restarting the module.
4.3.4.62. AT+REBOOTT
Function: Query/Set timing restart time
Format:
Query : AT+ REBOOTT<CR>
+ok=<time><CR>< LF ><CR>< LF >
Setting: AT+ REBOOTT=<time ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 time.: timing restart time, 1-720h, default is 24h.
4.3.4.63. AT+TIMEOUTEN
Function: Enable/Disable timeout restart function
Format:
Query : AT+TIMEOUTEN<CR>
+ok=<sta.><CR>< LF ><CR>< LF >
Setting: AT+ TIMEOUTEN=<on/off><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
 When querying, sta.: returns whether timeout restart function is enabled, including
 on, timeout restart function is enabled
 off, timeout restart function is disabled