Utax P-C2665 MFP

Sending Functions
5-5
5
Use the procedure below to select the size for transmission when sending scanned images.
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [Sending Size].
5 Press the OK key. Sending Size appears.
6 Press the  or  key to select the desired sending
size.
7 Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
8 Specify the destination, and press the Start key to
start sending.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection g
Sending Size: a b
*********************
2 Letter
3 Legal
1 *Same as OrigSize
Sending Size: a b
*********************
@ Envelope #10
[ Envelope #9
? *ISO B5