Utax P-C2665 MFP

Default Setting (System Menu)
8-33
8
4 Press the OK key. The Function Default menu
appears.
5 Press the  or  key to select [Backgrnd(Send)].
6 Press the OK key. Backgrnd(Send) appears.
7 Press the  or  key to select [Off], [Auto] or
[Manual(Darker 5)].
8 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Con.scan-ExptFAX
Set the continuous scan defaults. The available default settings are shown below.
Refer to page 4-14
for Continuous Scan.
Use the procedure below to select the default settings for continuous scanning.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Backgrnd(Send): a b
*********************
2 Auto
3 Manual(Darker 5)
1 *Off
Item Description
Off Continuous scan not performed
On Continuous scan performed
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings