Utax P-C2665 MFP User Manual

Default Setting (System Menu)
8-211
8
5 Press the  or  key to select [USB Device].
6 Press the OK key. USB Device appears.
7 Press the  or  key to select [Unblock] or
[Block].
8 Press the OK key. Completed. is displayed and the
screen returns to the System menu.
USB Storage (USB storage setting)
This locks and protects the USB interface connector (USB Storage). The default setting is Unblock.
NOTE: This function is available when USB Host is set to Unblock.
Use the procedure below to specify the USB Host setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [I/F Block Set.].
USB Device: a b
*********************
2 Block
1 *Unblock
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting

Utax P-C2665 MFP Specifications

General

Brand	Utax
Model	P-C2665 MFP
Category	All in One Printer
Language	English