Maintenance
9-8
Prolonged Non-Use and Moving of the Machine
Prolonged Non-use
If you ever leave the machine unused for a long period of time, remove the power cord from the wall outlet.
We recommend you consult with your dealer about the additional actions you should take to avoid possible
damage that may occur when the machine is used next time.
Moving the Machine
When you move the machine:
• Move it gently.
• Keep it as level as possible to avoid spilling toner inside the machine.
• Be sure to consult a service technician before attempting long distance transportation of the machine.
• Lock the lock lever (Yellow) for the optical system. It is located at the upper left edge close to the scanner.
Refer to Quick Start Guide.
• Remove all toner containers and waster toner box and put them in a plastic bag.
• Make sure that the release lever is in LOCK position. If not, pull the release lever towards you until it stops.
Refer to page 9-5.
WARNING: If you ship the machine, remove and pack all toner containers and the waste toner box in a plastic
bag and ship them separately from the machine.
To Next Page
Loading...
Need help?
General
