Utax P-C2665 MFP - Page 546

Appendix-8
2 The System menu appears.
3 Press the  or  key to select [Op Function].
4 Press the OK key. The Op Function menu
appears.
5 Press [Menu] (the Left Select key).
6 Press the  or  key to select [Detail]. The detail
setting screen appears.
You can now view detailed information on the
selected application.
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Op Function: a b
*********************
2 UG-33 T
[ Menu ]
1 ID-Card g
Menu: a b
*********************
2 Detail
1 Licence On