Vacon NX series User Manual

Control Keypad vacon • 105
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
6
Figure 73. Timeout time setting
NOTE! If the Default page value is 0 the Timeout time setting has no effect.
Contrast adjustment (P6.6.4)
In case the display is unclear, you can adjust it‘s contrast through the same procedure as for the
timeout time setting, see Timeout time (P6.6.3).
Backlight time (P6.6.5)
By giving a value for the Backlight time, you can determine how long the backlight stays on before
going out. You can select any time between 1 and 65535 minutes or 'Forever'. For the value setting
procedure, see Timeout time (P6.6.3).
90 s
READY
READY READY
90 s.
enter
60 s.
Tim eout tim e
Timeout time T imeout tim e
CANCEL
CONFIRM CHANG
E
11196.emf

Vacon NX series Specifications

General

Product type	AC Drive
Output voltage range	0-Uin
Frequency range	0-500 Hz
Enclosure classes	IP00, IP21
Mounting types	Wall
Braking chopper	Integrated or external
EMC filter	Built-in or external
Control modes	Scalar, Vector
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Communication options	Modbus, Profibus, CANopen, Ethernet
Ambient temperature range	-10°C to +50°C
Cooling method	Air-cooled