Vacon optea - Page 125

PROFINET IO vacon • 125
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
8
Figure 43.Screen capture from “PROFINET Master Simulator” requesting value for ID103.
8.4.8.1 Request first element of PNU964 value
The following information is used for this request:
Table 88. Request first element of PNU964
The following table contains messages sent during requesting value for PNU964.
Field Contents
Request reference 0x01
Request ID 0x01 = Request parameter
Axis Number 0x01
No. of Parameters 0x01
Attribute 0x10 = Value
No. of elements 0x01
Parameter Number 0x03C4 (964d)
Subindex 0x0000 (0d)