Vacon optea - Status Word Bit Support in VACON AC Drives; Monitoring of Control & Status Words in VACON AC Drives

APPENDIX 1 - VACON® IO DATA DESCRIPTION vacon • 209
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
11
11.4 Status Word bit support in VACON
®
AC drives
Table 210. FBFixedStatusWord bit support in different VACON
®
AC drives
11.5 Monitoring of Control & Status words in VACON
®
AC drives
The tables below describe where the control / status words can be read from different drives via
panel or PC-tool.
Table 211. Panel Tree for Control and Status Words
*Advanced Application only
For VACON
®
100 family, VACON
®
20 and VACON
®
20X/CP, VACON
®
Live PC tool is used for accessing
drive parameters. VACON
®
NCDrive PC tool is used with VACON
®
NXP drive.
NCDrive
• View --> Monitoring
•Type: Firmware
Bit Function
VACON
®
100
family
VACON
®
NXP
VACON
®
20
VACON
®
20 X/CP
0Ready xxxx
1Run xxxx
2 Direction x x x x
3Fault xxxx
4Alarm xxxx
5 At reference x x x x
6 Zero speed x x x
7Flux ready xx
8Info x
9-15 Reserved
Signal VACON
®
100 family VACON
®
NXP VACON
®
20
VACON
®
20 X/
CP
FBFixedControlWord V2.12.1 (Low Word) V1.24.1* - -
FBGeneralControlWord V2.12.1 (High Word) - - -
FBFixedStatusWord V2.12.11 (Low Word) V1.24.16* V3.1 -
FBGeneralStatusWord V2.12.11 (Low Word) V1.24.3* V3.2 -