Vacon optea - Siemens TIA Portal

APPENDIX 2 - EXAMPLE WITH SIEMENS PLC vacon • 223
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
12
17. Set the IO cycle. See Chapter 8.5 "PROFINET IO communications and connection timeout" for
details.
12.2 Siemens TIA Portal
This example shows how to configure the Siemens S7-300 PLC series to use the VACON
®
OPTEA
option board with the Siemens TIA Portal programming tool. This process is identical for VACON
®
OPTEA too. Check your individual PLC information. The information used in this example probably
differs from the one you have.
1. Create a new project.