Vacon optea - Installation in VACON 20; Enclosures MI1, MI2, MI3

Installation vacon • 31
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
5
5.4 Installation in VACON® 20
5.4.1 Enclosures MI1, MI2, MI3
1
Remove the cable connector lid from the
AC drive.
2
Select a correct grounding plate and attach it to the
option board mounting enclosure. The grounding plate
is marked with the supported enclosure size.
3
Attach an option board mounting enclosure
to the AC drive.
11555A_00
11649_00
11556A_00