Vacon optea - Page 134

8
vacon • 134 PROFINET IO
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Figure 48. Siemens TIA portal - Alarm description and help text
The VACON
®
data (faults, alarms, infos) mapped to PROFINET IO alarms is slightly different based
on the used AC drive:
Diagnostic messages are always sent from the PROFINET module (slot 1). Exception to this is that
PROFIsafe diagnostics are sent from PROFIsafe module (slot 2). VACON
®
faults are mapped to
PROFINET IO alarms according to the following table:
Table 100. VACON® data in different AC drives
AC drive type Fault Alarm Info
VACON
®
NXP/NXS
Yes Yes No
VACON
®
100 family
Yes
Yes, from version:
• FW0072V026 (INDUSTRIAL)
• FW0159V017 (FLOW)
No
VACON
®
20 family
Yes No No
Table 101.
AC drive Type Channel Error Extended Channel Error
VACON
®
NXP/NXS
1000 + Fault code Subcode
VACON
®
100 family
2000 + Fault code Fault Id
VACON
®
20 family
3000 + Fault code Subcode
PROFIsafe 4000 + Fault code Subcode