Vacon optea - Page 229

APPENDIX 2 - EXAMPLE WITH SIEMENS PLC vacon • 229
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
12
12. Select the inserted safety telegram to edit the safe fieldbus parameters. You need to set the
same safe fieldbus parameters here which were used when creating safety configuration with VA-
CON
®
Safe PC tool. For example, the F_iPar_CRC was calculated with the VACON
®
Safe PC tool.
12. When the safety telegram is added, TIA Portal shows a yellow circle with a red dot to indicate
that safety features are used with this device.