Vacon optea - Page 59

Commissioning vacon • 59
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
6
* These parameters are locked when either PROFINET IO connection, EtherNet/IP implicit connection
or a Modbus connection is established to write process data (i.e. when fieldbus can be used to
control the process).
SNTP Mode Disabled
Disabled (1),
Poll (2),
Listen Only (3),
Poll Fault (4),
Listen Only Fault (5)
SNTP mode
Server 1 IP P1 0 255 SNTP Server 1 IP address part 1
Server 1 IP P2 0 255 SNTP Server 1 IP address part 2
Server 1 IP P3 0 255 SNTP Server 1 IP address part 3
Server 1 IP P4 0 255 SNTP Server 1 IP address part 4
Server 2 IP P1 0 255 SNTP Server 2 IP address part 1
Server 2 IP P2 0 255 SNTP Server 2 IP address part 2
Server 2 IP P3 0 255 SNTP Server 2 IP address part 3
Server 2 IP P4 0 255 SNTP Server 2 IP address part 4
SNTP port 123 0…65535
SNTP server of client port depending on
SNTP mode
Time Interval 200 30…65535
Time interval in seconds for time informa-
tion polling and receiving
Time Offset H 0 -13…15
Time offset Hours.
Only visible in VACON
®
NXP family AC
drives.
Time Offset M 0 -59…59
Time offset Minutes
Only visible in VACON
®
NXP family AC
drives.
Name Default Range Description