When a recipe is selected, information on the
latest calibration is shown:
Calibration history view when the pulp type is
GW2, TMP2, CTMP2, SW2, HW2 or Other,
and single-point calibration has been done.
Calibration history view when pulp type is
RCF2 and multi-point calibration for total con-
sistency has been done. Use the left/right ar-
row keys to move from page to page. Use the
up/down arrow keys to move from one history
entry to the next.
Calibration history view for ash calibration.
Calibration | 40 (48)
K20798 V1.1 EN - 1 - 12/2019
To Next Page
Loading...
