2 Warnings & safety information
DANGER:
Always ensure that the incoming voltage and frequency are correct
before making any electric connections. Wrong connection may
damage the equipment! The applicable safety regulations must be
closely followed in all installation work. All electric connections may
only be made by appropriately trained and authorized persons!
DANGER:
Before any welding works in the vicinity of the devices, make sure that
operating voltage is not connected.
Caution:
Before installing the process coupling and ball valve, make sure that
the process pipeline is empty and depressurized!
Caution:
During installation, maintenance and service operations, remember
that the sample line may contain hot sample or water – be careful!
Warnings & safety information | 6 (48)
K20798 V1.1 EN - 1 - 12/2019
To Next Page
Loading...
