Vanair 050817 - Page 54

SECTION 3: SPECIFICATIONS AIR N ARC
®
200 SERIES ALL-IN-ONE POWER SYSTEM
®
PAGE - 32 090019-OP_r0
TABLE 3D: BOLT AND TORQUE SPECIFICATIONS
SOCKET HEAD
CAP SCREW
25 7 8
I.D. Marks No markings 3 lines 5 lines 6 lines Allen head
Material Low carbon
Medium -carbon,
tempered
Medium - carbon,
quenched &
tempered
Medium carbon,
quenched &
tempered
High-carbon,
quenched &
tempered
Tensile Strength
(minimum)
74,000 PSI 120,000 PSI 133,000 PSI 150,000 PSI 160,000 PSI
US BOLT TORQUE SPECIFICATIONS (Torque in foot-pounds)
22557788
Socket head
cap screw
Socket head
cap screw
Bolt
Diameter
Thread
per inch
Dry Oiled Dry Oiled Dry Oiled Dry Oiled Dry Oiled
1/4 20 4386108129 14 11
1/4 28 6 410171291410 16 13
5/16 18 9 7 17 13 21 16 25 18 29 23
5/16 24 12 9 19 14 24 18 29 20 33 26
3/8 16 16 12 30 23 40 30 45 35 49 39
3/8 24 2216352545355040 54 44
7/16 14 24 17 50 35 60 45 70 55 76 61
7/16 20 34 26 55 40 70 50 80 60 85 68
1/2 13 38317555957011080 113 90
1/2 20 52 42 90 65 100 80 120 90 126 100
9/16 12 52 42 110 80 135 100 150 110 163 130
9/16 18 71 57 120 90 150 110 170 130 181 144
5/8 11 98 78 150 110 140 140 220 170 230 184
3/4 10 157 121 260 200 320 240 380 280 400 320
3/4 16 180 133 300 220 360 280 420 320 440 350
7/8 9 210 160 430 320 520 400 600 460 640 510
7/8 14 230 177 470 360 580 440 660 500 700 560
1 8 320 240 640 480 800 600 900 680 980 780
1 12 350 265 710 530 860 666 990 740 1060 845
TABLE 3C: UNIT WEIGHT AND DIMENSIONS SPECIFICATIONS
I
Dimensions (Overall Package) Length (in) Width (in) Height (in)
Weight (lbs) (wet)
II
Weight (lbs) (dry)
II
Skid-Mount 50 23.2 27 546 536
With 30 Gallon Air Tank 50.5 23.7 43 740 730
I
See Diagram 4.5 (parts 1 and 2) for full dimension drawing, and Figure 4-1 for location space requirements.
II
Dimensions and weights listed do not include remote-mounted fuel tank or instrument panel (add 25 lbs for instrument
panel to above-listed weights).