Vatech PaX-i Plus User Manual

4. Installing the Equipment: Base Stand (Optional)
40 PaX-i Plus / Insight Installation Manual
2. Put the Main Unit back on the master packing EPS and remove the protective plastic
cover with knife. Then put the cables down on the floor carefully.
Be careful not to damage the cables or have the column surface
scratched.
3. Assemble two wrench bolts as shown as below.
Wrench Bolt
M10 x 25
(Part No. 24)

Vatech PaX-i Plus Specifications

General

Brand	Vatech
Model	PaX-i Plus
Category	Dental equipment
Language	English