9. Installing Software
PaX-i Plus / Insight Installation Manual 97
9.4 Installing the InstallPakage
A brief leaflet on the InstallPakage installation is included in the CD case.
The sensor type (PANO and CEPH: if installed) of the equipment is checked
in the this manual.
1. Turn on the PC and the equipment if they are not yet.
2. Insert the CD into the CD-ROM drive and then perform virus scan for the PC before
installing the CD.
3. Go to the InstallPakage folder and run Setup.exe.
4. The following screen will appear. Click Next.
To Next Page
Loading...
