Important Notes
ii PaX-i Plus / Insight Installation Manual
Important Notes
Moisture could be built up on the equipment from a sudden temperature
change inside and outside the installation room. Allow at least an hour before
turning ON the equipment to avoid condensation.
In order to avoid improperly balanced equipment, install the device on a
flat surface to maintain stability.
If the equipment is not stable, property damage and/or personal injury
may occur.
Do not push or pull the equipment.
Equipment should only be installed by an authorized technician,
complying with proper installation procedures
Failure to read and understand the information provided in this manual may
result in physical injury, damage to the equipment or equipment failure. Please
read each CHAPTER in its entirety and understand the information therein
before attempting any of the installation procedures.
To Next Page
Loading...
