Vatech PaX-i Plus

9. Installing Software
106 PaX-i Plus / Insight Installation Manual
9.5 Setting up the User-specific Information
Go to the corresponding section for set-up instructions, based on
the viewer program (EzDent-i (SDK)) installed on PC.
EzDent-i: Refer to section 9.5.1 when EzDent-i is installed.
9.5.1 When EzDent-i is installed
Running the Image Viewer
1. Run the image viewer. On your desktop, double-click EzDent-i icon. Its main
window will be displayed.