7. Setting up PC
80 PaX-i Plus / Insight Installation Manual
7.2 The Recommended PC Requirements
It is mandatory to ensure that the PC system configuration is
compatible with the PC system requirements for the imaging
and image viewer software.
Since image quality may be deteriorated from lack of resources,
observe the requirement guideline specified in the following
tables.
The PC components shall be approved by UL/CSA.
The PC shall be grounded well protectively.
The multiple portable socket-outlets shall not be placed on the
floor.
In case the equipment is to be installed in area with an unstable
electric power supply, it is strongly recommended to use the
AVR (automatic voltage regulator) in order to keep the line
voltage stable.
The PC system provided with the PaX-i Plus / Insight
undergoes the rigorous test for software compatibility before
shipping. Therefore, any later changes to the hardware and/or
software may cause malfunction.
Item Specification (HP)
CPU Intel Core i3-6100 3.7G 3M 2133 2C CPU
RAM 4GB DDR4-2133 DIMM(1x4GB) RAM
HDD 500GB 7200 RPM SATA 6G 3.5 HDD
Graphics board Integrated Graphic Card
Ethernet Interface Intel Ethernet I210-T1 PCIe x1 Gb NIC
Serial Port (RS232)
Integrated Motherboard
Power Supply ≥ 280 Watts (90% efficient)
Slots
1 full-height PCIe x16 (x4)
1 full-height PCIe x16
2 full-height PCIe x1
1 PCI (optional)
CD/DVD Drive
HP 9.5mm Slim Desktop SuperMulti DVDRW
ODD
Monitor Resolution 1280 x 1024 screen resolution
To Next Page
Loading...
Need help?
General
