Vatech PaX-i3D Smart Installation Manual

Pax-i3D Smart(PHT-30LFO) Installation Manual
50
4 Installing the Equipment: Floor Standing (Optional)
Removing the Transportation Handle
1.
Move the equipment to installation location as
close as possible.
2.
Remove the upper carrying handle.
Allen wrench 6 mm/0.24”
One installer should hold the handle, while
the other is removing the bolts.

Vatech PaX-i3D Smart Specifications

General

Brand	Vatech
Model	PaX-i3D Smart
Category	Dental equipment
Language	English