Vatech PaX-i3D Smart Installation Manual

Pax-i3D Smart(PHT-30LFO) Installation Manual
76
6 Setting up PC
Item HP LENOVO
CPU
Intel Xeon E5-1607 3GHz 1600 4C or
Faster
Intel Xeon E5-1607 3GHz 1066 or
Faster
RAM 16GB DDR3-1600 ECC RAM 16GB DDR3 1600MHz UDIMM
Hard disk drive 1TB SATA 1st HDD 1TB SATA 1st HDD
Graphics board
ZOTAC NVIDIA Geforce GTX780 Ti
AMP! D5 3GB
ZOTAC NVIDIA Geforce GTX780 Ti
AMP! D5 3GB
Ethernet interface Broadcom 5761 Gigabit Ethernet Intel 82579 Gigabit Ethernet
Serial Port (RS232) HP Serial Port Adapter Kit 1 (On Board)
Power supply ≥ 600 Watts (90 % Efficiency) ≥ 610 Watts (85 % efficient)
Slots
2 PCI Express Gen3 x 16 slots
1 PCI Express Gen3 x 8 slot
1 PCI Express Gen2 x 8 slot
1 PCI Express Gen2 x 4 slot
1 PCI slot
2 PCI Express Gen3 x 16 slot
1 PCI Express Gen3 x 16 slot (x4
Electrical)
1 PCI Express Gen2 x 4 slot
1 PCI slot
CD/DVD drive DVD-ROM, DVD+/-RW, Blu- Ray
DVD-ROM DVD R/W, Blu-Ray R/W
Multi-card reader
Monitor 19” 1280 x 1024 screen resolution 19” 1280 x 1024 screen resolution
Operating system Windows 7 Professional 64-Bit Windows 7 Professional 64-Bit
Recommended
system
Z420 S30
It is mandatory to meet the PC system requirements specified in the table
above.
In Windows 8, disable Windows Defender. When Windows Defender is not
enabled, Windows 8 is not protected from malware and virus.

Vatech PaX-i3D Smart Specifications

General

Brand	Vatech
Model	PaX-i3D Smart
Category	Dental equipment
Language	English