Vatech PaX-i3D Smart User Manual

8. Acquiring CT Images
103 I
PaX-i3D Smart
English
2. Use Temple Support Open/Close button on the control panel to widen temple
supports.
3. Guide the patient to the inside of the equipment.
4. Use the Vertical Frame Up/Down button or switch option to adjust the height of the
equipment so the patient's chin reaches the chin rest.
5. Guide the patient to stand in the center of the equipment and direct them to remain
in the position outlined below.
● Two hands: Hold the handles of the equipment tightly.
● Chest: Press against the equipment.
● Two feet: Keep both feet close to the inside of the base.
● Shoulders: Keep your shoulders relaxed and balanced.
● Cervical Spine: Straighten your body and stand still.
6. Direct the patient to correctly bite into the bite block groove with their front teeth.
7. Turn the knob to fix the bite block in place.
8. Direct the patient to maintain the posture as described below.
● Mouth: Close your mouth.
● Tongue: Touch the roof of your mouth.
● Two eyes: Close your eyes.

Vatech PaX-i3D Smart Specifications

General

Brand	Vatech
Model	PaX-i3D Smart
Category	Dental equipment
Language	English