Vatech PaX-i3D User Manual

PaX-i3D Green (PHT-60CFO) User Manual
59
4 Software Overview
E. Voxel Size
FOV (mm) Mode Voxel Size (mm)
50 x 50
Standard 0.08
Application 0.12
80 x 50
Standard 0.12
Application 0.20
80 x 80
Standard 0.12
Application 0.20
100 x 80
Standard 0.12
Application 0.20
120 x 90
Standard 0.20
Application 0.30
150 x 150
Standard 0.20
Application 0.30
160 x 100
Standard 0.20
Application 0.30
F. Metal Artifact Reduction
This function is used to reduce the articial effect generated by patients with
metallic materials in their dental region and improve image quality. When Metal
Artifact Reduction is selected, the time required to reconstruct an image is
doubled.
NOTE
Setting the default mode in the CBCT: The most frequently
used mode under the Image Quality, Voxel Size, Metal
Artifact Reduction can be congured as the default, which
requires the authority to change.
To change the default mode,
1. Ask the engineer in your region for the mode change.
2. Re-run the imaging program after setting up the related
parameters.
CAUTION
The default mode, if any, specified in a specific country
can't be changed for the user's intent.
[PI3DG_130U_44A_en]User Guide.indd 59 2016-05-24 오후 4:18:42

Vatech PaX-i3D Specifications

General

Brand	Vatech
Model	PaX-i3D
Category	Medical Equipment
Language	English