Need help?Do you have a question about the VeEX MTTplus-410 and is the answer not in the manual?
General| Model | MTTplus-410 |
|---|---|
| Manufacturer | VeEX |
| Dynamic Range | Up to 45 dB |
| Wavelengths | 1310 nm, 1550 nm, 1625 nm, 1650 nm |
| Pulse Width | 5 ns to 20 µs |
| Event Dead Zone | 0.8 m |
| Connectivity | USB, Wi-Fi, Bluetooth |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to 60°C |
| Interfaces | USB, Ethernet |
| Ethernet | Ethernet |
| Battery | Rechargeable Li-Ion battery |
Lists important functionalities and capabilities of the OTDR series.
Safety precautions for optical connectors, lasers, and electrical connectors.
Identifies and explains the various ports on the OTDR unit.
Explains how to navigate through the device's menus and screens.
Covers FX150 test ports, keypad, screen navigation, and WiFi setup.
Explains contaminants and recommends fiber inspection and cleaning.
Covers connection, setup, analysis, and management of fiber scope.
Introduces the VFL and provides instructions for its operation.
Guides on initial settings, test modes, and span configuration.
To Next Page
