Need help?Do you have a question about the VeEX VePal TX130M+ and is the answer not in the manual?
Detailed explanation of each key's function on the device's keypad.
Configuration of Ethernet port parameters for network testing.
Configuration of parameters for performing Bit Error Rate Tests (BERT).
Analysis and interpretation of BERT test outcomes.
Configuration of parameters for RFC 2544 conformance tests.
Analysis and reporting of RFC 2544 test results.
Analysis of throughput performance across multiple streams.
Configuration of parameters for Ethernet Operations, Administration, and Maintenance (OAM) testing.
Analysis of results obtained from OAM tests.
Configuration of Synchronous Ethernet (SyncE) test parameters.
Analysis of clock wander characteristics in SyncE.
Configuration of parameters for IEEE 1588v2/PTP synchronization testing.
Configuration of parameters for V-SAM service activation tests.
Analysis of reference clock stability and phase differences.
General| Form Factor | Handheld |
|---|---|
| Ethernet Testing | Yes |
| Fiber Testing | Yes |
| Power over Ethernet (PoE) | Yes |
| Link Layer Discovery Protocol (LLDP) | Yes |
| Optical Power Meter | Yes |
| Light Source | Yes |
| Model | TX130M+ |
| Wavelengths Supported | 850 nm, 1300 nm, 1310 nm, 1550 nm, 1625 nm |
| Test Protocols | Ethernet |
| Maximum Data Rate | 10 Gbps |
| Interfaces | USB |
| Display | Color Touchscreen |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% (non-condensing) |
| Battery Life | Up to 8 hours |
To Next Page
