S1 Detailed Results - CIR Test S1 Detailed Results - CIR/EIR Test S1 Detailed Results - Policing Test
Viewing Test Results on Different Streams
On the Services tab of Conf. Test and Perf. Test, tap on the service number (S #) next to the
Action Menu icon to view the test results for a specific stream.
CIR test: The test passes if all measured values are below the thresholds configured. If a threshold is disabled, it will not
be evaluated towards pass/fail criteria.
CIR/EIR test: The test passes if the received IR value is between the CIR (minus the margin allowed by the FLR) and
CIR+EIR.
Policing test: The test passes if the received traffic rate is at least at the CIR (minus the margin allowed by the FLR) but
TX130M+_e-manual_D07-00-051P_RevD00
To Next Page
