OTDR Series e-Manual, D07-00-076P-RevC00 Page 7 of 107
• Continuous operation of > 8 hours per Bellcore TRNWT-001138 (platform dependent)
• ReVeal software to transfer fiber test data, upgrade software and perform remote
control (check with factory on availability)
• Fiberizer Cloud to upload fiber test data
• VeExpress to check/upgrade software and installed options status (not available on
FX300 or FX150)
2.2 Key Features
• FTTx optimized parameters for best dead zones
• Filtered 1625 or 1650 nm OTDR port for in-service measurements
• Live fiber detection with embedded power meter
• Dynamic range up to 50 dB (model dependent)
• Event dead zone < 1m, attenuation dead zone < 4m
• Singlemode wavelength options - 1310, 1490, 1550, 1625 and 1650 nm (CWDM and
DWDM C-band also available)
• Multimode wavelength options - 850 and 1300 nm
• Telcordia SR-4731.sor file formats
• Generate and save traces in sor, pdf or csv format (model dependent)
• Auto mode with automated trace diagnostics, simplified setup and events detection
• Optional V-Scout mode – Intelligent Link Mapping using intuitive icons derived from
multiple test acquisitions
• Markers for distance, attenuation, reflectance and splice loss measurements
• Optional universal interface with interchangeable optical adaptors (SC, ST, FC, LC) for
OTDR port
• Power meter, light source, fiber inspection probe and VFL options
• Remote measurement via USB or WiFi connection using Fiberizer Desktop software
To Next Page
Loading...
