Verathon GlideScope - PROCEDURE 1. CLEAN THE GLIDESOCPE VIDEO MONITOR; PROCEDURE 2. CLEAN THE POWER ADAPTER; PROCEDURE 3. CLEAN THE CRADLE

40
PROCEdURE 1. CLEAN THE GLIdESCOPE VIdEO MONITOR
Ensure that you do not use any abrasive substances, brushes, pads, or tools when cleaning the video
monitor screen. The screen can be scratched, permanently damaging the device.
IMPORTANT
Clean the video monitor when it is visibly soiled and on a regular basis, as per a schedule established by the
medical care facility or provider.
1. Turn off the video monitor, and then unplug the device.
2. Using one of the following solutions, wipe the exterior of the video monitor:
• 70% isopropyl alcohol (IPA)
• Metrex
®
CaviWipes™
• AHP
®
Oxivir
®
• PDI
®
SaniCloth
®
AF3 Germicidal Wipes
PROCEdURE 2. CLEAN THE POWER AdAPTER
Clean the power adapter when it is visibly soiled and on a regular basis, as per a schedule established by the
medical care facility or provider. When cleaning the power adapter, use a cloth dampened with isopropyl
alcohol on the outside of the enclosure. Do not immerse the power adapter in water.
PROCEdURE 3. CLEAN THE CRAdLE
Clean the cradle when it is visibly soiled and on a regular basis, as per a schedule established by the medical
care facility or provider.
1. Wipe the cradle with a standard hospital‑grade, surface‑cleaning product.