4
2.1.2 modify provider
If any changes are saved (changed to
enable/disable) the All Provider Function
will be set to disabled automatically.
step 1
Press the [FUNCTION] key.
step 2
Enter [5] [4] and press [SELECT].
step 3
Select 2. Modify Provider and
press [SELECT].
step 4
Select a Provider to modify and
press [SELECT].
step 5
Using the keypad, Enter the 4 digit
Provider Password and press [OK].
This is the password that was set when
the provider was originally entered
into the terminal.
step 6
Select the Provider Option you want
to modify, make the change and press
[SELECT] to save the change.
You can then press [CANCEL] or
[BACK] to return to the menu, or press
[SELECT] to go through the rest of the
provider options.
Note: When you exit the menu a
provider summary will be printed with
the new settings.
To Next Page
Loading...
Need help?
General
