VeriFone HICAPS VX820 - Processing and Cancelling HICAPS Claims

0
step 2
Selecting [ENABLE] will enable HICAPS
Settle Txn Listing.
Note: This function is ENABLED by default.
2.3 processing a HICAPS claim
2.3.1 processing a HICAPS claim
transaction (HICAPS terminal)
step 1
To start a HICAPS Claim transaction,
simply swipe the patient’s Health Fund
card through the terminal.
step 2
Use the arrows on the touch screen or
key the number located next to the
providers name to choose the Provider
that you would like to claim with and
press [SELECT].
Note: This prompt will only be displayed
if more than one provider is loaded into
the terminal.
step 3
Using the keypad, enter the -digit
Patient ID printed on the card relating to
the specific patient receiving treatment
and press [OK].
Note: This value will default to 01 if
nothing is entered.