40
step 9
The terminal will ask you to confirm the
time entered. Press [YES] if the start auto
settlement time displayed is correct, or
[NO] to re-enter a different time.
step 10
The terminal is programmed to retry
an auto settlement upon failure to
complete. Using the keypad, set the
number of settlement retry attempts
(between and ), and press [OK].
To accept the default (), just press [OK].
3.3.3 host forced settlement
The terminal automatically settles
at :0EST each day. The automatic
settlement time can optionally be moved.
See Automatic Terminal Settlement ...
If the terminal is not settled then it will
be automatically settled by the HICAPS
switch at the relevant time.
Note: If the HICAPS switch settles then no
receipt is printed. To obtain Totals please
use Last Settlement Enquiry, refer to 3.3.1.
Note: All times are Melbourne/
Sydney times.
3.3.4 merchant password
The terminal is able to have a known
password, a password that is set up
when your terminal is installed or
a scrolling password.
If you know your password you can
change your password using the below
steps. If you don’t know your password
you will need to contact the HICAPS
Helpdesk on 00 650 85 and they will
tell you how to change your password.
step 1
Press the [FUNCTION] key on the touch
screen.
step 2
Using the keypad, enter [5] [6] and
press [SELECT].
To Next Page
Loading...
Need help?
General
