8
last settlement
To print a report summarising the
totals for EFTPOS transactions previous
settlement period.
3.3.2 automatic terminal settlement
This option enables your terminal to
settle automatically at a pre-determined
time each day.
To set up your terminal to settle
automatically:
step 1
Press the [FUNCTION] key on the touch
screen.
step 2
Using the keypad, enter [5] [6] and press
[SELECT].
step 3
Select 2. Auto Settle NAB and press
[SELECT].
Note: To view the current settlement setup
select 1. Settlement enable/disable.
step 4
Select option 1. All Merchants if you
would like to setup auto settlement for
all active merchants on the terminal,
or 2. Select Merchant if you would like
to set up an individual merchant.
To Next Page
Loading...
