50
6. Thermal printer
The HICAPS terminals have high speed,
whisper quiet thermal printers . They must
only be loaded with special thermal paper
available from HICAPS, ordered either
through the terminals, refer: .6 Ordering
Terminal Rolls or by contacting the HICAPS
Help Desk on 00 650 85.
6.1 VX820
Loading the VX80 Thermal Printer.
The front of the VX 80 dock also
includes the Paper Roll Dispenser and
thermal Printer.
There is a handle/level at the base with
a paper roll icon on it.
Lift the handle/level and the paper guard
will swing open.
Remove whatever is left of the old roll.
Place the new roll into the paper chamber
– ensuring that the paper is feeding out
from the bottom of the roll.
Close the paper guard.
6.2 VX680
Loading the VX680 Thermal Printer.
The paper is loaded on the back
of the VX680.
Flip the terminal over and lift the
handle/lever.
The paper guard will swing open.
Remove whatever is left of the old roll.
Place the new roll into the paper chamber
– ensuring that the paper is feeding out
from the bottom of the roll.
To Next Page
Loading...
Need help?
General
