9
UM150 User’s Manual
9
UM150 User’s Manual
STEP 6: USB device users would insert their USB device now, and wait for
Windows to detect and install drivers for the device.
NOTE FOR HANDSET USERS: If you selected USB (to connect a phone) and
have not already installed the data cable drivers supplied with the cable, you must
install them now. To install the data cable drivers click the Cancel button below to
exit the Setup Wizard and then refer to the documentation included with the cable.
Please plug the data cable into your wireless phone and then plug the cable into
your computer. If your wireless phone is not turned on, do so now.
If the USB device is detected, you will see the following screen.