Verizon Wireless UM150 - Application Options Settings; Venturi Preferences

35
UM150 User’s Manual
35
UM150 User’s Manual
VPN Tab
The following options exist on the VPN tab (“Tools,” “Preferences,” “Wi-Fi” tab, select
“Add” or a network in the “Preferred Network” list and “Edit,” then “VPN”):
VPN Client: VZAccess Manager automatically detects if certain VPN clients like
Microsoft, Cisco, CheckPoint, etc, are installed on the computer and allows you to
select the one you wish to use. Check with your network administrator to setup
your VPN connection.
If the VPN client you wish to use does not appear in the list, you can select Other
VPN Application.
Other VPN Application: This allows automatically running any VPN program when
you use VZAccess Manager to connect to the Wi-Fi network you added or edited.
Select the browse button to browse to the desired VPN application you want to
run when you connect to the Wi-Fi network you added or edited, using VZAccess
Manager. If you have a shortcut you normally use to launch your VPN application
you may want to right click on it and select properties to see where the program is
located and how it's named.
3.3 Options
To access the Options tab, click on the “Tools” menu, then “Preferences....” and
select the “Options” tab.