Verizon Wireless UM150 - Toolbar Buttons Explained

40
UM150 User’s Manual
40
UM150 User’s Manual
4. ADDITIONAL FEATURES
In addition to the basic features mentioned in previous sections, VZAccess
Manager has the additional features listed below.
4.1 The Status Bar
The details of your current connection can be seen in the status bar at the bottom
of the VZAccess Manager interface. This status bar is always visible when the
interface is fully expanded. For information on minimizing the VZAccess Manager
interface, see the section “Minimizing the Interface.”
Most users will see the following “NationalAccess - BroadbandAccess” version of
the status bar:
Those who are using the “VZGlobal” service will see the following version:
Connection Status
The text on the bottom left portion of the status bar below the “Verizon Wireless”
text reflects your current state. During an active connection, this text will change to
“Connected.” If you are not connected, it will display “Not Connected.”
WWAN Device Status Area
The text that reads “Verizon Wireless” can change to the following:
• Device not inserted - Your wireless device (PC Card, ExpressCard or USB
Modem) is removed from the notebook.
• Device not activated - Your wireless device needs to be activated. Select Activate
from the Options menu.
Coverage
An icon is displayed if you are in VZGlobal, NationalAccess or BroadbandAccess
coverage. Move the mouse pointer over these icons to see the tool tip showing the
name of the current service.
40
UM150 User’s Manual