23
NM & PG PLUS FID STATIONS
USER MANUAL
Version 1.03.0000
www.vicidbs.com
Place the dust lter the right
way (follow the arrow)
Outlet for condensed water
The air will ow through the zero air generator, even if the
ON/OFF button is OFF. At this point, make sure that you have
connected the Air outlet to your GC- or other application. At
least make sure you have a restriction and that the outlet is not
fully open.
Once the ON/OFF button is pressed (will turn red) the oven
of the zero air generator will start to heat. The yellow light “Air
Warm up” will start to ash.
As soon as the temperature is reached, the green “Air Ready”
LED will light. The instrument is ready.
To Next Page
Loading...
