First start-up of machine
First start-up of machine
First start-up of machine
First start-up of machine
• The side guard for the cutting
unit must be correctly
positioned before start up.
• Check that the mechanical
safety valve is open.
• Carefully connect the tractor's
PTO shaft.
• Carefully increase the speed
on the PTO to 540/1000 RPM.
• Check that the machine runs
smoothly without any
vibrations.
• Return the PTO shaft to idle
speed.
• Activate all the hydraulic
functions of the machine, one
by one.
2.4 First start up
19
To Next Page
Loading...
